The number of audio functions per multifunction device is limited by the following factors: When the adapter driver calls PcAddAdapterDevice, the function's fourth parameter, MaxObjects, specifies the maximum number of miniport driver objects that the driver can support. In these configurations, the Toaster device is a child device on the multifunction device, and the multifunction device is a child device on a PCMCIA bus. The INF file and installers for the Toaster device install the Serial driver as lower-level device filter driver to provide a 16550 UART-compatible interface for the Toaster device.
Drivers Microsoft Multifunction Devices Driver
Drivers Microsoft Multifunction Devices Windows 10
HPE QLogic NC382i/NC532x Online Firmware Upgrade Utility for Windows Server x64 Editions By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee. | Type: | Firmware - Network | | Version: | 4.1.0.25(24 Oct 2016) | | Operating System(s): | | Microsoft Windows Server 2008 R2 | | Microsoft Windows Server 2008 Small Business | | Microsoft Windows Server 2008 x64 | | Microsoft Windows Server 2012 | | Microsoft Windows Server 2012 Essentials | | Microsoft Windows Server 2012 R2 | | Microsoft Windows Small Business Server 2011 Standard and Essentials |
Microsoft Windows Server 2008 Essential Business | | File name: | cp028813.exe (3.2 MB) |
This package contains the utilities and binaries for upgrading HPE ProLiant QLogic 57xx Gigabit Ethernet NICs Boot code, PXE, NCSI and iSCSI code running under Microsoft Windows Server 2008 x64 Editions, Windows Server 2008 R2, Windows Server 2012 and Windows Server 2012 R2. Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Initial release. Prerequisites:
This package requires the appropriate driver for your network adapter be installed before firmware can be updated. To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value: | aa9fcc48964517476f263ed2d77b90760572932f5e923344528312d747fc7f17 | cp028813.exe |
Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained. Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the 'Install' button to proceed with the installation. Network connectivity may stop during the upgrade process and may need to be restarted after completion. End User License Agreements:
HPE Software License Agreement v1
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Important:
HPE recommends the following drivers, as applicable, for use with the firmware in this product: - HP Broadcom 1Gb Multifunction Drivers for Windows Server 2008 x64 Editions, version 7.8.50.0(D) or later
- HPE QLogic NX2 10/20GbE Multifunction Driver for Windows Server 2008 x64 Editions, version 7.13.60.0 or later
Notes:
This software package contains the following firmware versions:
| NIC | Boot Code Version | PXE Version | iSCSI Version | NCSI Version | | HP NC382i Integrated Dual Port Multifunction Gigabit Server Adapter | 5.2.3 | n/a | 7.4.2 | 2.0.12 | | HP NC532m Dual Port 10GbE Multifunction BL-c Adapter | 6.2.28 | 7.0.53 | 7.4.2 | n/a | | HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (3654) | 6.2.28 | n/a | 3.1.5 | n/a | | HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (7058) | 6.2.28 | n/a | 4.2.10 | n/a |
Supported Devices and Features:
This product supports the following network adpaters: - HP NC382i Integrated Dual Port Multifunction Gigabit Server Adapter
- HP NC532i Dual Port 10GbE Multifunction BL-c Adapter
- HP NC532m Dual Port 10GbE Multifunction BL-c Adapter
HPE recommends the following drivers, as applicable, for use with the firmware in this product: - HP Broadcom 1Gb Multifunction Drivers for Windows Server 2008 x64 Editions, version 7.8.50.0(D) or later
- HPE QLogic NX2 10/20GbE Multifunction Driver for Windows Server 2008 x64 Editions, version 7.13.60.0 or later
Version:4.1.0.25 (24 Oct 2016) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Initial release. | Type: | Firmware - Network | | Version: | 4.1.0.25(24 Oct 2016) | | Operating System(s): | | Microsoft Windows Server 2008 Essential Business | | Microsoft Windows Server 2008 R2 | | Microsoft Windows Server 2008 Small Business | | Microsoft Windows Server 2008 x64 | | Microsoft Windows Server 2012 | | Microsoft Windows Server 2012 Essentials | | Microsoft Windows Server 2012 R2 | | Microsoft Windows Small Business Server 2011 Standard and Essentials |
|
DescriptionThis package contains the utilities and binaries for upgrading HPE ProLiant QLogic 57xx Gigabit Ethernet NICs Boot code, PXE, NCSI and iSCSI code running under Microsoft Windows Server 2008 x64 Editions, Windows Server 2008 R2, Windows Server 2012 and Windows Server 2012 R2. EnhancementsUpgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Initial release. Installation InstructionsPrerequisites:
This package requires the appropriate driver for your network adapter be installed before firmware can be updated. To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value: | aa9fcc48964517476f263ed2d77b90760572932f5e923344528312d747fc7f17 | cp028813.exe |
Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained. Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the 'Install' button to proceed with the installation. Network connectivity may stop during the upgrade process and may need to be restarted after completion. Release NotesEnd User License Agreements:
HPE Software License Agreement v1
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Important:
HPE recommends the following drivers, as applicable, for use with the firmware in this product: - HP Broadcom 1Gb Multifunction Drivers for Windows Server 2008 x64 Editions, version 7.8.50.0(D) or later
- HPE QLogic NX2 10/20GbE Multifunction Driver for Windows Server 2008 x64 Editions, version 7.13.60.0 or later
Notes:
This software package contains the following firmware versions:
| NIC | Boot Code Version | PXE Version | iSCSI Version | NCSI Version | | HP NC382i Integrated Dual Port Multifunction Gigabit Server Adapter | 5.2.3 | n/a | 7.4.2 | 2.0.12 | | HP NC532m Dual Port 10GbE Multifunction BL-c Adapter | 6.2.28 | 7.0.53 | 7.4.2 | n/a | | HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (3654) | 6.2.28 | n/a | 3.1.5 | n/a | | HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (7058) | 6.2.28 | n/a | 4.2.10 | n/a |
Supported Devices and Features:
This product supports the following network adpaters: - HP NC382i Integrated Dual Port Multifunction Gigabit Server Adapter
- HP NC532i Dual Port 10GbE Multifunction BL-c Adapter
- HP NC532m Dual Port 10GbE Multifunction BL-c Adapter
ImportantHPE recommends the following drivers, as applicable, for use with the firmware in this product: - HP Broadcom 1Gb Multifunction Drivers for Windows Server 2008 x64 Editions, version 7.8.50.0(D) or later
- HPE QLogic NX2 10/20GbE Multifunction Driver for Windows Server 2008 x64 Editions, version 7.13.60.0 or later
Revision HistoryVersion:4.1.0.25 (24 Oct 2016) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Initial release. |
|
Drivers Microsoft Multifunction Devices Wireless
Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models. |
|